“SURE”
BRAND WIRE WOUND RESISTORS - SSH
SPECIALLY
DEVELOPED TO MEET EUROPEAN STANDARD
SPACE
HEATER:
CONSTRUCTION :-
FORMER :- High quality ceramic former imperious to moisture penetration and exceptional ability to withstand
thermal shock.
RESISTANCE WIRE :- High quality iron free nickel chromium and copper nickel wires are space wounds on
former and the ends are spot welded to the terminal.
SILICON COATING :- The composition and method of application of the silicon coating, Exclusively developed
and employed, is the real secret behind the outstanding performance of ‘SURE’ Heater Resistor under most
severe and climatic conditions.
TERMINAL :- Snap on terminals specially designed to meet global requirement of the best grip easily.
MOUNTING BRACKET :- The Heater Resistor is provided with powder coated ‘L’ type mounting bracket with
shock absorbing material between porcelain and metal bracket.
Mechanical Data:
All Dimensions are in mm
Watt |
TD |
l |
L |
100 |
140 |
170 |
200 |
150 |
220 |
250 |
290 |
200 |
270 |
300 |
340 |
250 |
345 |
375 |
415 |
300 |
420 |
450 |
490 |
ELECTRICAL SPECIFICATION
- Standard Tolerance :-
+5%.
-
Dielectric Strength :-
1000 V. A. C.
-
Insulation
:-
2.5 KV for 1 minute.
-
Megger Value :-
Min 100 M with 1000 V megger when tested individually.
-
Power Derating :-
Derated Linearly to Zero at 250oC.from normal power rating at 25oC subject to
temperature limitation of 200oC.
-
Voltage Co-Efficient :-
The resistance value is independent of applied Voltage.
-
Stability R
:- < 3% after 2000 hours load test.
< 5% after 56 days climatic and damp heat test.
< 1% after 3 years Shelf Life
-
Temperature Co-Efficient of Resistance :- <100 PPM/ o C.
SALIENT FEATURES:
|